$3.99 - $18.99
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
• Threader • Remover • Reamer
$5.99 - $32.99
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
$7.99 - $32.99
Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant
• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers
$7.99 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
• Lightweight reinforced nylon construction • Smooth edges won't scratch rims or pinch tubes • Storage clip features built-in abrasive surface
• Precision-sized, hardened-steel, chrome-plated spoke wrench • Deep U-channels for a great grip • 8-groove design fits 9/10/11/12/13/14/15 gauge spokes/nipples • Made in Taiwan
$10.99 $16.49 33% Off
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.
Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator. Kit includes: - 1 #1586 Presta Seal - 1 #1588 Schrader Seal - 2 #1576-2 O-rings for Shuttle-valve - 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors
Tri-Flow Citrus Cleaner/Degreaser provides a powerful foaming action that cuts through and cleans the toughest grease, dirt and oil. - Easy to use trigger allows user to lay down a layer of foam that will cling and penetrate into the part to provide superior cleaning performance - Quick evaporation technology leaves no residue and needs no rinsing - Biodegradable formula
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
Topeak's X-Tool+ is an in intelligently designed, 11-function folding multi-tool that can easily handle most mid-ride adjustments and repairs. Perfect for everyday cycling, its updated design secures an 8mm hex tool bit between the tool's sides, allowing for a tight-folding design with extra capabilities. Includes a T20 / 2.5mm L-type wrench that can also be used to tighten the hinge pins of the X-Tool. - Allen wrenches: 2 / 2.5 / 3 / 4 / 5 / 6mm - 8mm hex tool bit - Torx wrench: T20 / T25 - #2 Phillips screwdriver - Weight: 112g
Face what comes your way, with this well-equipped and portable jersey pocket essential. Upping the ante from the 6-in-1, it comes with the addition of a 2mm Hex key and flat-head screwdriver. With a lightweight aluminium carrier and precision CNC-machined tool bits, this is a versatile, portable roadside multi-tool. - CNC'd steel tools - Ergonomic sides - 360-degree bit movement - Lock-tight sealed bits - Lightweight aluminium body - Width: 36mm - Length: 71mm - Weight: 84g Eight functions: - Hex key (mm): 2 | 3 | 4 | 5 | 6 - Phillips head: 2 - Flat head: 5 - Torque: 25
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
Sunlite's Adjustable Wrench is forged from steel and chrome plated for maximum durability. It's 6-inch length strikes the balance of maneuverability with good leverage. And the handle is coated for a non-slip, comfy grip.
Park's Hex Wrench Set offers 3, 4, 5, 6, 8, and 10mm Allen wrenches with chamfered tips for a great grip and easy use. The one-piece fiber-reinforced-resin handle is light, comfortable, slip-resistant, and 40% stronger than traditional steel handles.
$24.95 - $26.95
The MT-10, 20, 30 and 40 are high quality folding take-along tools that feature forged aluminum side plates, a mix of hardened and plated tools, and smooth ergonomic operation.
Chain problems can ruin a ride, so having the right kit in hand can literally make or break a trip out. The portable, hardened steel tool can break all 8 to 12-speed chains. A detachable pin can be removed, replaced and reversed, offering extra longevity to the most important part of the tool. - CNC'd hardened steel - Replaceable pin - Fits 8-12 speed chains - Ergonomic body - Width: 52mm - Length: 60mm - Weight: 118g - Head: Steel - Body: Aluminium
Quickly fix whatever on-ride mishaps come your way with this astonishingly versatile pocket workshop. Packed with 16 individual precision CNC machined parts and a lightweight aluminium body, it's function rich, yet still jersey-pocket friendly - the perfect pocket companion for the open road or trail. - CNC'd steel tools - Ergonomic sides - 360-degree bit movement - Lock-tight sealed bits - Lightweight aluminium body - Width: 46mm - Length: 71mm - Weight: 110g Sixteen functions: - Hex key (mm): 2 | 2.5 | 3 | 4 | 5 | 6 | 8 - Spoke gauge: 13 | 14 | 15 | 16 - Phillips head: 2 - Torque: 25 - Mavic spline - Bottle opener - Chain splitter
The Chamber multi-tool offers 13 functions from an efficient T-bar head. A smooth finish caddy protects the tools and ensures the tool doesn’t snag jersey pockets or equipment. The T-Bar system increases functionality and ensures that hard to reach areas of the bike are easily accessed. A reversible ratchet model offers further functionality, providing a simple and elegant improvement upon a cyclist’s essential. Sleek,snag free, lightweight design -The smooth metal case of the Chamber safely and securely holds 13 tools, ensuring there is no snagging on clothing or equipment. Weighing in at only 162 grams it is lightweight and portable. Easily reaches inaccessible places -Seated securely within the Chamber are 6 double-ended bits and an 8mm over-bit. The bits can be used at different lengths in the Chamber head, increasing access to the many hard to reach areas on a bicycle. T Fixed or ratchet options -2 versions of the Chamber are available; Fixed head, which enables use of the tool at different lengths and Ratchet head, which offers the additional functionality of a reversible ratchet. Includes: 2mm/2.5mm/3mm/4mm/5mm/6mm/8mm Allen keys, SL3 and SL5 flat-blade screwdrivers, #1 and #2 Phillips screwdrivers, Torx T10 and T25 -Head: Ratchet or Fixed stainless steel -Base: Stainless steel -Body: Aluminium -Tools: 70mm steel
Page 1 of 1