Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Aheadset preload adjusting bolt

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

- Sunlite Cottered Pins

- Crank dust cap - Works with most three-piece crank models

- Crown Race - Size: 27.0mm

- Crown Race MX - Size: MX TH 26.4mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Chrome - Sold individually

- Type: Lock washer - Size: 1" Keyed

- Routes cables underneath the bottom bracket - Will not rust or corrode

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16