Lyra Disc Brake Pads with Spring

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.

Die cast alloy calliper, ideal for MTB and Hybrid cycles. Supplied with pads. - Die cast alloy construction - Linear pull brake - 55mm rubber brakes shoes Inc. - Steel guide pipe and rubber boot Inc

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

SRAM's PC 830 Chain offers accurate shifting, excellent durability, and superior power transfer for 8-speed drivetrains.

- 7-speed MTB cassette - Super Fluid Drive™ technology - Steel cogs and lock ring - ~ 310g - SHIMANO Equivalent CS-HG41 / CS-HG20

- AL6061-T6 alloy quick-release seatpost clamp with CNC machined cut-outs - Stainless steel bushing ensures smooth lever action - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

- MODEL NO: CS-HG41-7 - SERIES: SHIMANO - Combination: 11-13-15-18-21-24-28T (ac) - Combination name(Group name): 11-28T (ac) - Compatible chain: IG/HG - Speeds: 7-speed - Type: HG

Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

Origin-8's Look Delta Cleats are compatible with Look Keo-style pedals. They feature 9-degrees of float. - These cleats use the Look/SPD-SL bolt pattern.

- Fits most MTB shoes - For clipless SPD-style pedals - 4-degree float

A hand up for comfort Trek Ergonomic Comp MTB Grips are endurance-ready grips made for comfort on the long haul. A single nylon lock-on offers a secure hold to the bar and plenty of hand space. They feature a paddle-style profile to boost surface area, maximizing comfort and ride feel. Strategic core cutouts maximize the thickness of vibration-damping grip material in key places, reducing fatigue with 28% more padding where you need it most. Product details: - Single nylon lock-on grip for secure fitment and maximum hand space - Strategic core cut-outs allow for 28% more padding at key touchpoints - Larger tread under palms and smaller at fingers optimizes grip and padding - Softer compound boosts ride feel for the ultimate comfort and control - Ergonomic design adds to the surface area supporting riders for lasting comfort - Made from 80% recycled material - 3mm M4 bolt increases hold and resists stripping Cutout for comfort Unique core cutouts deliver 28% more padding at key touch-points across the grip, minimizing vibrations to reduce hand fatigue while boosting control. New softer compound The updated, softer compound provides an amazing in-hand feel, plus, lasting comfort, confidence, and control over any terrain. Hand-optimized tread The purpose-designed, left- and- right-specific tread pattern gives you maximum grip, confidence, and comfort on any ride. Single alloy lock-on A single alloy lock-on provides additional hand space while giving you the secure confidence of a lock-on grip.

Lightweight aluminum construction with a versatile riser bar design.

A set of durable, SPD-compatible replacement cleats that come with all mounting hardware. Get that fresh cleat feel These solidly-built cleats work with any SPD-compatible pedals whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit. Product details - Compatible with all 2-bolt SPD-style pedals - Directly compatible with Bontrager Comp MTB and Commuter pedals - Includes mounting hardware - Float: 4-deg

- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate

- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams

More comfort, more control. Superlight and durable, and optimized for vibration absorption using EVA foam and QuellGel Silicone, the perfect all-day handlebar tape. Where it thrives: The open road, out in the elements What it's built for: Comfort, grip Highlights: - Lightweight EVA foam with a 4mm QuellGel silicone layer provides extra comfort and improved grip feel - Non-slip suede-effect finish for control in all conditions, rain or shine / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 4mm, length: 200cm, weight: 102g

•Side pull brake •Includes lever, caliper, cable and housing •Forged aluminum construction •Includes replacement bolt for mounting on fork

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

When it's time to replace your old 8-speed cassette, check out SRAM's PG-850. Its steel construction and SRAM's PowerGlide technology combine to deliver miles of solid shifting and outstanding durability.

- Indexed replacement twist shifters for triple chainring drivetrains - Shimano-compatible (2 to 1 ratio) - Shimano Equivalent: SL-RS45 / SL-RS35

- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

Semi-Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" - Semi-metallic compound for minimal noise with maximum power - Fits all TRP four piston calipers and Tektro four piston calipers - Color: TRP red - Sold per wheel - Replacment pad for Tektro Q10YS Compatibility: Clarks M4 / Shimano Saint M810, M820, M640, M8020 / TRP G-Spec E-MTB, Quadiem, Quadiem G-Spec, Slate Evo, Slate T4

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.

• Easy-on, easy-off • Available in two chain widths and two colors • Available in six teeth sizes

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA